Born Free Leap'n Lions RV Club Info & Discussion Forum

For those that have had the newer and older mold style. With the newer mold was there any improvement in the exterior storage. The older style, when compared to other makes of the same era did seem to have more storage than the others. But it seems like the doors are small compared to the compartmen...

I'm curious what the heavy vinyl is that you have over your carpet. and how it's attached?

This style is what I ended up using. I just removed the magnet from the screen door by drilling out the rivet. I did have to sand the latch for a little extra clearance to get the door to pen and close without interference.

I have a 2000 BFT that has the magnet screen door latch. Magnet that holds the screen to the main door and a heavier magnet the holds the screen closed to the door frame. My question is, has anyone replaced the screen door catch magnet with a lever style latch. There is only about 3/8" between ...

Mine is like the pictures posted. Four 1/2" bolts and some short beads of weld. I guess I'm curious what is holding your bumper on if it is not welded or bolted to the frame. Maybe someone can confirm when the body change was. I thought they changed in 2006, and used a updated looking bumper. I...

Did you actually run it on the external pump or just get it to push fuel? If you've gotten it to run can you list the pump model and where you fed power from. This would by a nice work around if the pump failed.

I have a 22' rear door the has front jack-knife couches. And I want to convert them to two twin beds. For anyone that has this arrangement can you describe how the base is constructed. I can figure it out but was wondering how they came from the factory. Is the mattress loose that sits on a solid de...

My layout is very much like the picture in the link. It appears the difference in my BF is there is not enough room behind the drivers seat for the vertical leg for the table. The picture I found had the leg running at maybe a 45 deg angle to give clearance for the seat back. If I can find the facto...

Can anyone point me to information on the pivoting table. The previous owner removed mine and the only thing left is the bracket behind the driver seat. Are there any images or dimensions posted that I could look at. A sales brochure showed a picture where it seemed to store over the couch on the dr...

I ended up using a Class A Customs tank.

I ended up using a freshwater tank. It mounted further up than the old tank so the white tank was not an issue. I used uniseal fittings and put my fittings where needed. I don't remember the source for the tank but will post it when I come across it.

Someone posted in the past what brand of tanks BF used but I can't seem to find the post now. Anyone know what brand of tank BF used? specifically looking for a black tank.

Mine handles fine I drove it 1500 miles bringing it home. It has only about 40k miles. I would not change or upgrade anything unless I was trying to improve offroad performance. I would like to get some increase in clearance and a differential locker. Thanks, that's what I was hoping to hear. I do ...

Hello all, I have some specific questions for those that have or have had the E350 22' rear door model. I only have about 60 miles behind the wheel and that was on a very calm day driving home. I'm getting ready to do some front suspension and steering work that is needed. Ball joints, tie rods and ...

Hi all, new to the forums. I have a 21' BFFT and may need to replace the black tank. My questions are does anyone know if the toilet flange and vent stack are glued in or installed with slip grommets. In my manual there is a loose page that shows it to be a 24 gallon tank that just the toilet feeds....