Born Free Leap'n Lions RV Club Info & Discussion Forum

also look on tube there are a few videos that show the choke but I do not know what generator you have. Utube is your friend.

Might look to see if Cummins has a manual or if you can find a tech who could tell you where it is. If it is a gas unit her is the manual https://www.norwall.com/product_pdfs/78 ... m_2018.pdf

Talk to Xtreme paint and graphics in Nacogdoches Tx. They can fix anything fiberglass and can even make a mold up. They have worked on. Y coaches for years

I leave my coach plugged in all the time in storage. The outback inverter charger will float charge when fully charged.

IT might be easier to consign it at Motorhomes of Texas. I have sold two coaches thru them. they used to be a BF dealer for a few months and I ordered mine thru them. FYI Foretravel factory is across the street and there are a number of RV dealers in the town of Nacogdoches. They sell lots of coache...

Thanks

We always travel with a full rank of water. In my class a I had over 7k capacity in my Born free I still have quite a bit extra capacity. 35 gallons of water weighs less then 300 pounds. If you were to break down and sit in a repair lot you would be happy for the water. Fuel is way more weight. I ha...

When I needed to replace my steer tires I asked and they suggested continentals steer tires up front instead of Michelins. They have the edges with solid rib of rubber and will last longer they said and it is not four wheel drive so the deep grooves also will move rain water better. I have the F550 ...

Thanks for the idea. It is a great one

Well, I ordered the parts and replaced it with a minimum of fuss and it works great on this trip. No more going in and out. I did clean off the contacts at the bottom of the door. There was rust on them so I used some emory cloth to clean them off.

We will see how long this lasts.

I installed one in my 2007 rear bath under the stove and lost a drawer as a result. Use the front as a door

As the moderator of a large RV site for many years I know the work that it requires. Thank you for your dedication and work over the years.

Will look into those

I had that happen on one of my coaches. The bar was a bit to short so I welded on a piece on the back and gave it another 1/4 inch. As to operating it I would look up latches and see what you can find or take a picture to a RV dealer parts department.