Search found 120 matches

by lassen
Mon Jul 18, 2011 2:17 pm
Forum: General and Technical Information, Questions, and Responses
Topic: Mor-Ryde Installation
Replies: 15
Views: 21768

Don't have an answer as to why they only list the F-53 chassis on the website. But I also see that part of the website is being reconstructed. My model numbers are... steering control TC25135 bracket kit TC5802 And this model is not adjustable from inside the coach. I guess a quick phone call to the...
by lassen
Sun Jul 17, 2011 6:01 pm
Forum: General and Technical Information, Questions, and Responses
Topic: Mor-Ryde Installation
Replies: 15
Views: 21768

Our coach is the 2005 24RB. After the initial 4000 miles with the coach loaded the way we travel had a front-end alignment at a truck alignment center in Sioux Falls. Next was a trip to the Blue Ox factory at Pender, Ne. Had the Blue Ox TruCenter steering stabilizer installed.... $547.02 installed (...
by lassen
Tue Jun 14, 2011 7:06 pm
Forum: General and Technical Information, Questions, and Responses
Topic: Homecoming/Alaska Caravan
Replies: 2
Views: 2975

Ed & Carol.... I see you will be at the Homecoming, great. Not interested in the Bra you have, but sometime back you had asked about the "SeaLevel II Tank Monitor System". We will be at the homecoming and you are welcome to check out our installation. And if you are parked close......I...
by lassen
Wed Jun 08, 2011 5:53 pm
Forum: General and Technical Information, Questions, and Responses
Topic: Bornfree Homecoming
Replies: 12
Views: 9190

Bill... A call to Steve would have been my next move, so thanks for already taking care of that. You do need a copy of that letter as it gives the revised schedule and a list of other things planned for the event including an auction of donated items for the benefit of The American Red Cross. See yo...
by lassen
Wed Jun 08, 2011 5:00 pm
Forum: General and Technical Information, Questions, and Responses
Topic: Bornfree Homecoming
Replies: 12
Views: 9190

Bill.... Recieved the change in start date letter from BORN FREE in middle May. Included in that letter was a list of five local campgrounds. Now that list shows Humboldt County Fairgrounds at $20.00 a nite. I know two yrs. ago it was $10.00. You suppose the factory has new or wrong information? Jac...
by lassen
Sat May 07, 2011 5:41 pm
Forum: General and Technical Information, Questions, and Responses
Topic: Stubborn mold/mildew spots
Replies: 8
Views: 11004

ED....Are the spots on the trim or on the caulk? Its always the caulking on mine that gets dark and the only thing I've found that turns them back to white is WD-40. I spray it on a shop rag and wipe the caulk, comes clean.

Jack
by lassen
Mon Apr 25, 2011 4:17 pm
Forum: General and Technical Information, Questions, and Responses
Topic: drain valve leaking
Replies: 3
Views: 4260

David.....I've always had the same problem with one of mine near the water heater. If I turn the valve to the maximum closed position, I get a slow drip. By backing off the valve a tad toward the open position, the leak stops so thats where its left. Six yrs. now.

Jack.....
by lassen
Tue Feb 08, 2011 8:11 pm
Forum: General and Technical Information, Questions, and Responses
Topic: Dump Valve Replacement - Lesson Learned!
Replies: 7
Views: 9326

What I've read is to use Silicone Spray on the valve blade and shaft. With tanks drained and rinsed, I spray up the outlet tube with the Silicone Spray extender tube while operating the valve in and out. Then spray the shaft and tube again while operating the valve. Also if the water starts leaking ...
by lassen
Wed Jan 05, 2011 6:24 pm
Forum: General and Technical Information, Questions, and Responses
Topic: TV suggestions
Replies: 16
Views: 16827

bigdipper.....I second your recomendation of the Insignia (Best Buy) TV. I have the 19" model ( an open box item ) @ Best Buy for $159.00 . It made the trip last summer to Alaska and back and have had no problems with it. Dallas......I have ours on the Born Free Inverter circuit that the old Tv...
by lassen
Tue Sep 28, 2010 8:20 pm
Forum: General and Technical Information, Questions, and Responses
Topic: HOLDING TANK GAUGE
Replies: 9
Views: 11721

Dave....I also have installed the Seelevel II system last fall after discussing the unit and the installation with Mel. The Installation is pretty straightforward and by following instructions had no glitches. I wanted it for the accuracy of the tank and Battery measurments while boondocking, and it...
by lassen
Thu Apr 29, 2010 7:51 pm
Forum: General and Technical Information, Questions, and Responses
Topic: valve shaft
Replies: 8
Views: 7235

Bill....When my dump valves get sticky or stiff, I've used Silicone Spray. Drain the tanks, have the valve open and partially open... and spray up in the tank with the Silicone Spray. Also spray the shaft and operate it several times and re-spray. Also, Silicone spray or grease works good on the toi...
by lassen
Thu Oct 22, 2009 11:29 am
Forum: General and Technical Information, Questions, and Responses
Topic: On the road with dead awning and tv antenna
Replies: 28
Views: 29491

Chuck & Judy....On our 2005 24RB the electric awning is powered from a fuse located on the auxillary fuse block. That is a six position fuse block located near the converter panel under the kitchen cabinet.

Jack
by lassen
Tue Aug 25, 2009 7:44 pm
Forum: General and Technical Information, Questions, and Responses
Topic: Skreenz
Replies: 4
Views: 5634

Tom.....Skreenz gets our vote, purchased ours in 2007. When we arrive and get parked at a campsite the skreenz go on first and the hood gets proped up about a foot. This lets the heat dissipate from the cab section and the engine compartment. The nice thing about the skreenz is that they can be left...
by lassen
Thu Aug 20, 2009 8:32 pm
Forum: General and Technical Information, Questions, and Responses
Topic: Kaspersky - O.T.
Replies: 15
Views: 15520

Bill.....Bought a new laptop last fall @ Best Buy, they sold me and installed Kaspersky, so far no problems. Haven't yet decided what I'll do this fall when the year is up. Lets see what other's have to say on the issue.

Jack
by lassen
Sun Aug 02, 2009 2:45 pm
Forum: General and Technical Information, Questions, and Responses
Topic: Tire Man
Replies: 8
Views: 8242

Bill.....Replaced my tires last Sept. Asked my tire man if he could change the seals in my metal stems. He said not a problem and no charge. He also changes the rubber valve stems when installing new tires on autos. So I think it is a good idea to replace the seals along with new tires.

Jack....

Go to advanced search