Hello!
We have a 1999 Born Free with about 106,000 miles. We've had it for 5 years, bought it with 45000 miles on it. Right now I'm having a shop put 4 Bilstein shocks on it.
It has the (to my knowledge) original brake pads, and I asked the shop to replace the front pads as a precautionary measure. (I didn't want to be in the middle of nowhere and hear grinding noises. They recommended replacing both the pads AND THE ROTORS since the rotors were "rusty". This makes no sense to me. We've almost never used the RV on salt-covered roads, and the rotors to me look fine.
We travel the West/Southwest extensively, and avoid the Northeast like the plague. In my mind it's a lot better (& cheaper) to replace pads on all 4 wheels before they start making noises. The shop's advice came in the process of them replacing the old shocks with new Bilstein shocks (which I provided). The shock replacement job is tough, and I'm only paying $225 for labor only.
Does the "new rotor" idea make sense to anyone. The brakes work fine now and don't pull or chatter. I'm thinking they underestimated labor for shock replacement.
Thanks!
Stan F.
Front Brakes
Moderator: bfadmin
Re: Front Brakes
That's a tough one without seeing them, Stan... but if you've got 105k on the rotors, they may be getting thin. That mostly means that at some point in the not too-distant future, they'll get hot, warp, and you'll be replacing them anyway. The other issue is that if they're grooved at all, and I'd expect they would be, then your pads will quickly groove into them and then more likely need to be replaced when you replace the rotors later too.
I'd say with that kind of mileage on them, just replace them. YMMV.
Roger
I'd say with that kind of mileage on them, just replace them. YMMV.
Roger
'06 Born Free 32 RQ Kodiak Chassis
(Former: '01 Born Free 23 RK)
Dinghy: '16 Jeep Wrangler Rubicon with a Blue Ox Aladdin tow bar.
Traveling with Sir Winston and Lady Rae (Cavalier King Charles Spaniels)
(Former: '01 Born Free 23 RK)
Dinghy: '16 Jeep Wrangler Rubicon with a Blue Ox Aladdin tow bar.
Traveling with Sir Winston and Lady Rae (Cavalier King Charles Spaniels)
-
- Posts: 485
- Joined: Sun Jun 20, 2010 9:15 am
Re: Front Brakes
I did my front brake pads myself this summer at 90,000 miles. I always have done brakes myself for all my vehicles and living in Minnesota, rust is a huge problem. You only need to replace the rotors if the thickness is less than minimum, they are warped, or damaged (such as metal-on-metal when pad is completely worn). Rust on the brake surface will occur after sitting awhile and will wipe clean the first time you hit the brakes.
While you're at it, check your rear brakes. Last year I checked my front pads and they were okay. I assumed that the front pads would wear faster than the rear so I didn't check the rear. When I was out west I started hearing bad noises from the rear when I braked. One rotor was shot. The other side had a sliver of pad remaining so that rotor was okay. It's not a trivial task replacing a rear rotor.
While you're at it, check your rear brakes. Last year I checked my front pads and they were okay. I assumed that the front pads would wear faster than the rear so I didn't check the rear. When I was out west I started hearing bad noises from the rear when I braked. One rotor was shot. The other side had a sliver of pad remaining so that rotor was okay. It's not a trivial task replacing a rear rotor.
Tom
2005 24' RB
Towing 2016 Mini Cooper convertible on tow dolly
New Hope, MN
2005 24' RB
Towing 2016 Mini Cooper convertible on tow dolly
New Hope, MN