new tires
Moderator: bfadmin
new tires
I called my local Tire place that I use for my car tires for many years, just on the chance he might direct me to someone who could install new tires on my rig, 26 RSB.
They have a small shop, but are know for quality work at reasonable prices.
John, the owner, said his bays are too low for my coach, but that he will do it outside on 4/9.
6 new Michelin LT M/S 225/75R16E"S, mounted and balanced, $1325.00 Total
I already have the Metal stems, with the stainless cable from the rear inside tires, mounted on the outside tires for easy checking and filling, courtesy of Ron Purdom the former owner.
I'm hoping not to get negative comments on this, I just wanted to share what I believe is very good news. I want to thank the guys who steered me in the right direction, about what for me, a new guy, was a very confusing topic. Thanks, guys
They have a small shop, but are know for quality work at reasonable prices.
John, the owner, said his bays are too low for my coach, but that he will do it outside on 4/9.
6 new Michelin LT M/S 225/75R16E"S, mounted and balanced, $1325.00 Total
I already have the Metal stems, with the stainless cable from the rear inside tires, mounted on the outside tires for easy checking and filling, courtesy of Ron Purdom the former owner.
I'm hoping not to get negative comments on this, I just wanted to share what I believe is very good news. I want to thank the guys who steered me in the right direction, about what for me, a new guy, was a very confusing topic. Thanks, guys
- Mel Wilbur
- Posts: 617
- Joined: Thu Aug 11, 2005 2:39 pm
Pete, Good call. I'm with John. I put new tires on my coach last summer, and they really give me peace of mind.
Roger
Roger
'06 Born Free 32 RQ Kodiak Chassis
(Former: '01 Born Free 23 RK)
Dinghy: '16 Jeep Wrangler Rubicon with a Blue Ox Aladdin tow bar.
Traveling with Sir Winston and Lady Rae (Cavalier King Charles Spaniels)
(Former: '01 Born Free 23 RK)
Dinghy: '16 Jeep Wrangler Rubicon with a Blue Ox Aladdin tow bar.
Traveling with Sir Winston and Lady Rae (Cavalier King Charles Spaniels)
Pete,
I agree with Mel, make sure that the tire shop knows how to properly remove the wheel covers. When I had to buy a new tire in Florida this past January, I about had a heart attack shock: when I seen the tech with what appeared to be a small crow bar getting ready to remove the wheel cover. Sounds like you are getting everything in tip top shape which is good.
I agree with Mel, make sure that the tire shop knows how to properly remove the wheel covers. When I had to buy a new tire in Florida this past January, I about had a heart attack shock: when I seen the tech with what appeared to be a small crow bar getting ready to remove the wheel cover. Sounds like you are getting everything in tip top shape which is good.
- Mel Wilbur
- Posts: 617
- Joined: Thu Aug 11, 2005 2:39 pm
Pete,
Just in case Ron did not get a chance to show you how the wheel covers work here is what the lug nuts that hold them on look like. A-screws onto the original stud, B-holds the wheel cover in place and C-makes it look nice.
There are two sets to each wheel and they are marked with the small circular indent to make them easy to find.
I would recommend that all lug nuts be put on with 140 foot pounds of torque per Ford specs.
Just in case Ron did not get a chance to show you how the wheel covers work here is what the lug nuts that hold them on look like. A-screws onto the original stud, B-holds the wheel cover in place and C-makes it look nice.
There are two sets to each wheel and they are marked with the small circular indent to make them easy to find.
I would recommend that all lug nuts be put on with 140 foot pounds of torque per Ford specs.
- Attachments
-
- wheel cover lug nut.jpg (12.91 KiB) Viewed 24057 times
Mel & Connie
tires
I had the new tires mounted and balanced today, no problems, smooth transfer. Did a test run to check the balancing, seems real good. The owner of the tire place, John seemed a little upset when I questioned him about removal and installation, but when I showed him the printout of the nuts from Mel's post, he was fine. He had "done many motor homes over his 40 years at his place".
Next week, the factory.
Oh! The tires we removed had 46,800 miles, and looked new, with still almost full tread. However, the inside of all of them had many spider cracks, and I could see the danger.
John said he would not drive 10 miles on them, and he would certainly not give or sell them to anyone.
Next week, the factory.
Oh! The tires we removed had 46,800 miles, and looked new, with still almost full tread. However, the inside of all of them had many spider cracks, and I could see the danger.
John said he would not drive 10 miles on them, and he would certainly not give or sell them to anyone.
Re: tires
I'm surprised tires only four, maybe five, years old with almost full tread were unsafe to drive on.jerseypete wrote:Oh! The tires we removed had 46,800 miles, and looked new, with still almost full tread. However, the inside of all of them had many spider cracks, and I could see the danger.
John said he would not drive 10 miles on them, and he would certainly not give or sell them to anyone.
Barb & Bill
2004 Born Free 22' Built for Two (Sold)
no longer towing a 2008 Smart ForTwo
Escondido, CA
2004 Born Free 22' Built for Two (Sold)
no longer towing a 2008 Smart ForTwo
Escondido, CA
new tires
Follow up to new tires. I did not know, and nothing was mentioned, about valve stems, when I brought up this topic. I was ignorant of valve stems being separate from the tires, that they are mounted by themselves in the rims.
Sooooo, my tires were mounted with the old valve stems, and I pulled into the BF factory not knowing one of my inside rear tires was flat. Bret hooked me up with their tire place a couple miles away, and they took care of the problem, showing me the old stem. The next day, the other rear inside tire, guess what? Same thing.
In contacting the shop that installed the tires, the owner was surprised his man had not done the stems, and will take care of the expenses involved.
In my mind, I will now never think of tires without the stems, for the next guy
Sooooo, my tires were mounted with the old valve stems, and I pulled into the BF factory not knowing one of my inside rear tires was flat. Bret hooked me up with their tire place a couple miles away, and they took care of the problem, showing me the old stem. The next day, the other rear inside tire, guess what? Same thing.
In contacting the shop that installed the tires, the owner was surprised his man had not done the stems, and will take care of the expenses involved.
In my mind, I will now never think of tires without the stems, for the next guy
Pete;
I thought it was standard practice to install new valve stems with new tires. It's cheap insurance to do them at the same time.
They did put steel valve stems in, not the rubber ones I hope.
Did your BF come with the valve extenders on the rear wheels? When you go back to the local tire guy, make sure the extenders are tightened down, sometimes they work loose a little.
Glad you had a safe trip.
John
I thought it was standard practice to install new valve stems with new tires. It's cheap insurance to do them at the same time.
They did put steel valve stems in, not the rubber ones I hope.
Did your BF come with the valve extenders on the rear wheels? When you go back to the local tire guy, make sure the extenders are tightened down, sometimes they work loose a little.
Glad you had a safe trip.
John
The coach I had before the BF had Firestones on it with about 5 years. An outside rear tire came off, on the highway and tore the insulation away in a couple of spots underneath the coach.
It also hooked a propane line and pulled it down to the highway, but did not disconnect, and beat up the area outside the wheel well of the coach.
The tire guy said he has seen the steel belt come off and wrap around the axle, requiring it to be cut off with a torch. Another guy said when his tire came off it beat up the underneath and broke open his black water tank on the road.
Not to be taken lightly.
It also hooked a propane line and pulled it down to the highway, but did not disconnect, and beat up the area outside the wheel well of the coach.
The tire guy said he has seen the steel belt come off and wrap around the axle, requiring it to be cut off with a torch. Another guy said when his tire came off it beat up the underneath and broke open his black water tank on the road.
Not to be taken lightly.
Bornfree (1999 Rear Kitchen)
Traveling with Chester (The Boxer) - at least in spirit
Traveling with Chester (The Boxer) - at least in spirit
Brent,
There is insufficient information offered in your report to indite Firestone.
Perhaps a valve stem failed (as mentioned in other posts on this forum) or an extender failed (we have had both things happen but luckily we were parked at the time) or a foreign object possibly damaged the tire. None of these would be Firestone's fault.
There is insufficient information offered in your report to indite Firestone.
Perhaps a valve stem failed (as mentioned in other posts on this forum) or an extender failed (we have had both things happen but luckily we were parked at the time) or a foreign object possibly damaged the tire. None of these would be Firestone's fault.