New Inverter - Advice/Ideas Needed
Posted: Sat Mar 11, 2006 3:04 am
Our new whole house inverter (2Kw continouous / 4Kw Peak) has arrived and I need to figure out the best way to install it so that it's not powering the converter and where there is the least chance of conflict between the inverter and shore power or the generator. Are there any good websites showing options and safety devices available for tying in inverters?
Of particular interest to me: Does anyone have or know where I can find a detailed schematic/drawing of Born Free's AC layout. If someone has already done this I would be forever grateful for the information that can potentially same me from a weekend of standing on my head, crawling under the rig in the snow, pulling panels apart and buzzing wires. The drawings in the factory manual lack the detail needed to do this - or I'm missing some of them.
Also a couple more questions to those who may have done this:
- The inverter will be the 3rd set of wires tied directly to the batteries. I'm thinking of putting in some kind of bus bars for DC connections in the battery compartment so that only one set of wires is flexed when pulling out the battery tray for maintenance. This way subsequent connections can be made easily to the busses and the battery connectors don't get torqued around so much. Anyone done this? Where did you find parts and how did you approach the implementation?
- And, where have you located your inverter? The storage area under the front sofa is close to the battery compartment (i.e., short DC run / longer AC run and weather protected.) Will the fan noise and heat given off be objectionable to the person watching TV 18" above on the sofa? ...or is it better to locate the inverter near the converter and distribution panel in the rear of the coach (longer high amp DC run / short low amp AC run. Wiring exposed under the coach)?
- I'd like to avoid a separate 150 - 200A fuse/breaker in the inverter's DC line due to cost and the added resistance. However, if there is a bus bar configuration that includes a high amp safety safety fuse - it just might make sense. Where would you look for high amp busses with fusing closely integrated while keeping weight, size and cost reasonable?
All opinions and advice are welcome.
Mike
Of particular interest to me: Does anyone have or know where I can find a detailed schematic/drawing of Born Free's AC layout. If someone has already done this I would be forever grateful for the information that can potentially same me from a weekend of standing on my head, crawling under the rig in the snow, pulling panels apart and buzzing wires. The drawings in the factory manual lack the detail needed to do this - or I'm missing some of them.
Also a couple more questions to those who may have done this:
- The inverter will be the 3rd set of wires tied directly to the batteries. I'm thinking of putting in some kind of bus bars for DC connections in the battery compartment so that only one set of wires is flexed when pulling out the battery tray for maintenance. This way subsequent connections can be made easily to the busses and the battery connectors don't get torqued around so much. Anyone done this? Where did you find parts and how did you approach the implementation?
- And, where have you located your inverter? The storage area under the front sofa is close to the battery compartment (i.e., short DC run / longer AC run and weather protected.) Will the fan noise and heat given off be objectionable to the person watching TV 18" above on the sofa? ...or is it better to locate the inverter near the converter and distribution panel in the rear of the coach (longer high amp DC run / short low amp AC run. Wiring exposed under the coach)?
- I'd like to avoid a separate 150 - 200A fuse/breaker in the inverter's DC line due to cost and the added resistance. However, if there is a bus bar configuration that includes a high amp safety safety fuse - it just might make sense. Where would you look for high amp busses with fusing closely integrated while keeping weight, size and cost reasonable?
All opinions and advice are welcome.
Mike