Page 1 of 1

PD4655 or Ultra III

Posted: Tue Aug 19, 2014 6:58 pm
by Ray
Has anyone done a pro's and con's of these two converters - They are different but it is hard to get information. So far I think some of the difference's are:

Ulrtra made in China
Ultra does not have the PD4655 21 day 15 min boost to aid in desulfation (good or bad?)
Ultra does not have a button on the DC board to manually set charge mode (why would I need this?)
Ultra will not accept a remote tether for charge modes like PD4655 (again, why would I want this?)

One problem (as always) the products dont list the same spec sheets so you can compare,

Ultra makes a big deal about filtered dc power - didnt see anything on the PD4655 (again, do you need that?)

PD4655 lists allot of over current and under current protetions - didnt see that on Ultra (we know that is important)

and the list goes on - hard to compare - just wondering if anyone has comparison knowledge or more detail

Thanks

Re: PD4655 or Ultra III

Posted: Tue Aug 19, 2014 7:59 pm
by whemme
Personally I would recommend the PD4655. It is currently priced at $205 at BestConverter.com vs $213 for the 55-amp Ultra III. Give Randy a call at BestConverter.com and ask his advice. He lists an 800 phone number on his website.

Re: PD4655 or Ultra III

Posted: Tue Aug 19, 2014 10:21 pm
by randallrae
I would favor the PD4655 if is made anywhere BUT China .

Re: PD4655 or Ultra III

Posted: Fri Aug 22, 2014 10:04 am
by jimnphyl
Most of what I’ve read about WFCO units are complaints, along with plans or recommendations to replace the WFCO with a Progressive Dynamics unit.