Born Free Leap'n Lions RV Club Info & Discussion Forum

FYI,
I purchased Ultra 5" Swivel Skid Wheels from State Trailers in Phoenix for my BF. Was able to remove the wheels from this new set and install them into my existing mounts on the BF. $200 but I couldn't find any other source! Ultra-Fab Products
https://www.carid.com/search/skid+wheel ... ed5840aa20

Another place to find these caster wheels is Harbor Freight I replaced the two on my motorhome only four bolts each.

https://www.harborfreight.com/catalogse ... &q=casters

Hope this helps, mike

So did the new mounting line up to existing bolt holes so you didn’t have to drill new holes?

on my motorhome there were two mounting plates per side, bolted to the frame extension that sandwiched the frame between them, and the caster assembly bolted to these plates. I suggest you either measure the bolt pattern or remove the caster and match it up with the replacement for the bolt pattern. most industrial supply will have casters you can use

Previous discussion here -Mike