Page 1 of 1
I need help with replacing Molding/trim
Posted: Sat Apr 09, 2022 4:32 pm
by Carey
I would like to replace the molding/trim not sure what to call it. On our 2013 coach, It’s the trim that seals the body panels/roof section. It starts at the lower portion of the side panel runs up over the top and to the lower panel on the the other side. I have looked for it online but don’t know what to call it and tried 6 Roblees RV they had no clue! Can anyone help? It’s about an 1” wide.
Re: I need help with replacing Molding/trim
Posted: Fri Apr 15, 2022 5:47 am
by melamax
Amazon has RecPro 1" wide trim,should work fine,I have used similar, sealed well wili cover the lap where the 2 panels meet ok. Probobly need to drill new holes. I always seal the old holes to be sure no leaks before putting down the new strip.Good luck, the weather should be in your favor soon...Art Krause
Re: I need help with replacing Molding/trim
Posted: Fri Apr 22, 2022 11:33 pm
by Liamlunchtray
Art - Is there any trick to getting the new trim in place? I figure I should go through mine in the near future, but I dont exactly know what I'm getting into. Did you replace your screws with stainless and then some sort of sealant over the screw heads?
Re: I need help with replacing Molding/trim
Posted: Fri May 06, 2022 7:31 pm
by Carey
Thanks for the info
Re: I need help with replacing Molding/trim
Posted: Fri Jul 01, 2022 11:34 pm
by Carey
Thank you