I am going to have to repair a small section there where there was a previous leak. And I'm sure there's some damage I'll need to fix behind the passenger seat when I figure out that leak (just got it back from the shop and it's still leaking
I'm planning on replacing the divider screws with stainless steel and see if that does the trick...
Thanks everyone for the help and suggestions!!
***************
I've been told my BF 24RB has severe delamination. But in reviewing previous questions on this topic it appears that the fiberglass isn't laminated, so can't "delaminate". Yay!!
However, one side is very wavy and both sides have multiple areas where the skin is bowed out and you can physically push it back in. Also, a moisture meter showed mostly 30-50% moisture on both sides and the back of the RV.
I've had Beatrix for 2 years and have been fighting leaks behind the passenger seat since I bought her. Hopefully it's fixed, but not very hopeful as it's been "fixed" multiple times including being tented a few times... (there was also one behind drivers seat, but it appears to be fixed)
So My questions are:
Is the popping out areas something to worry about?
Is there anyway to double check the moisture readings, other than taking it apart on the inside to verify?