Taking the arms off the flexsteel dining chairs
Posted: Sat Mar 23, 2024 5:07 pm
Well, we have the adjustable arms with the lever to lock the arm in place. It has made turning the chairs hard with the table out. Also it kind of extends towards the entryway. So I tried to remove them. Our old born free we pushed in at the 10 o’clock position but no go. This one you have you push in at around 1130 and it is tough to push in far enough. I barely got one off after trying for 40 mins. Then I could see the hole where the pin went into. You really have to compress that spring. So I could not get enough leverage with the chair moving. So I went and got a ratchet strap to really crank down then I pushed a bit more and it moved to about 2 o’clock and came right out.